Easycare quick studs are suitable for most hoof boots. The brand new Easycare quick studs come in a pack of 16, up to 10 can be used in a single boot, 4 per boot is a common configuration. The quick studs need the quick stud application tool to fit them, and do not penetrate through the sole of the boot. Started holes are drilled in the bottom of the hoof boot and the stud can then be applied whenever needed and removed when not required. Easycare quick studs are ideal to help give extra traction on wet, slippery or muddy ground and are small enough to be safe on some harder surfaces (at the riders discretion). The quick studs are small and round (approx 7mm accross at the widest point and protrude 5mm when in the boot) and ideal for extra traction.
- Long lasting, Tungsten Carbide tip and core with hardened steel screw portion, one size.
- Quick and easy application process allows studs to be installed and removed with the boot on the hoof (see instructions).
- Instructions enclosed in pack
- Application tool (not included) needed for installation along with drill and 3/16" drill bit.
- Sold in sets of sixteen (16)
